Last updated: October 2, 2026
What Anfim Grinders Actually Cost
Anfim is a Milanese commercial grinder brand that found a second life in home espresso after the Luna launched a few years back. Prices run from roughly $700 for the entry Caimano up to around $2,000 for the doserless on-demand models aimed at small cafés and serious home users. That’s real money, so it helps to know what the tiers buy you.
Street prices fluctuate with importers and sales, but these are the realistic ranges you should budget for:
| Model | Typical Price (USD) | Burrs | Dosing | Best For |
|---|---|---|---|---|
| Anfim Caimano | $700–800 | 64mm flat | Timed, doserless | Home espresso on a tighter budget |
| Anfim Luna | $950–1,150 | 65mm flat | Timed, doserless | The default home recommendation |
| Anfim Alba | $1,700–2,000 | 80mm flat | Timed, doserless | Enthusiasts, light roasts, low-volume cafés |
| Anfim Pratica / Scody II | $1,300–1,900 | 75mm flat | On-demand, commercial duty | Small cafés, heavy home use |
Prices vary by region and dealer — European buyers often pay less than North Americans due to import markups. Check a few authorized dealers before assuming a listed price is the floor.
The Luna: Where Most People Should Land
See also: Best Espresso Grinders for Home: Burr Size, Workflow and Budget Matched • Breville Smart Grinder Espresso
The Luna is the model that made Anfim a household name among home espresso people, and at around $1,000 it sits in an awkward but defensible spot. Its 65mm hardened flat burrs are the same geometry used in Anfim’s commercial line, grind speed is fast (a double in about five seconds), retention is low, and the timed dosing is repeatable enough for single-dosing workflows.
The trade-offs: the stepped adjustment collar is coarse compared to worm-drive grinders, so small espresso tweaks take a light touch. The hopper and overall industrial look won’t match a minimalist kitchen. And while it’s quiet for a flat-burr grinder, it’s not silent.
If you’re shopping at this price, it’s worth comparing against the broader field of flat burr single-dose espresso grinders, which includes 64mm options from Eureka, DF64-style grinders, and others in the $500–900 range.
When Cheaper Is Fine
Here’s the honest part: most people don’t need an Anfim. A good 64mm flat-burr grinder — a DF64 Gen 2, a Eureka Mignon with upgraded burrs, or similar — gets you 90% of the cup quality at half the price. If you pull two to four shots a day of medium or medium-dark roast, you will not taste a meaningful difference between a Luna and a well-aligned 64mm grinder.
Where the Luna (and above) earns its premium:
- Light roasts and high extraction. The bigger, better-aligned burrs produce tighter particle distribution, which matters most with dense, lightly roasted beans where channeling is easy.
- Volume and speed. Grinding for a household of four coffee drinkers, or entertaining regularly, the speed difference adds up.
- Durability. Anfim builds for café duty cycles. The motor and burr carrier are overbuilt for home use — these grinders routinely run a decade in commercial settings.
If none of those apply, a solid mid-range option like a DF64-class single dose grinder is the rational buy, and you can put the savings toward a better machine or fresh beans.
Stepping Up: Alba, Pratica, and the Commercial Line
The Alba (80mm burrs, around $1,800–2,000) and the Pratica/Scody II (75mm, café-duty) are a different purchase. You’re paying for larger burrs, faster grinding, and in the Alba’s case a newer motor-and-geometry package designed to compete with the Mahlkönig-tier grinders.
Buy these if:
- You drink mostly light-roast espresso and can already taste the ceiling of your current grinder.
- You run a cart, pop-up, or small café and need commercial reliability without stepping up to a $2,500+ Mahlkönig or Fiorenzato.
- Grind speed matters to you — the Alba chews through a dose in a couple of seconds.
Don’t buy them if your shots already taste balanced. The jump from Luna to Alba is real but incremental — maybe a cleaner cup and a bit more clarity, not a transformation. For a home barista pulling three shots a day, that $800 difference is better spent elsewhere almost every time.
For café use, also cross-shop the broader category of commercial on-demand espresso grinders, since pricing and dealer support vary a lot by region.
Known Weaknesses and Ownership Costs
No grinder is free of quirks. What to expect with Anfim:
- Adjustment feel. The stepped collars on the Luna and Caimano lack fine resolution. If you like to chase a shot by half-second changes in shot time, a worm-drive stepless grinder is less frustrating.
- Popcorning and hopper design. Anfim hoppers are utilitarian. Single-dosing works fine, but the stock setup is designed around a loaded hopper.
- Burr seasoning. New flat burrs need a few kilograms of coffee run through before particle distribution settles. Don’t judge the grinder in week one.
- Parts and service. A genuine strength — burrs, chutes, and electronics are standard commercial parts and dealers stock them. The flip side is that out-of-warranty service usually means shipping a heavy unit or paying a tech.
Burr replacement cost is modest (a 65mm set runs roughly $60–90) and on a home-use schedule you’ll likely never need it — figure many years of daily use before burrs dull noticeably.
FAQ
Is the Anfim Luna worth $1,000?
Yes, if you drink light-roast espresso or value speed and build quality. If you drink medium roasts and pull a couple of shots a day, a $500–650 flat-burr grinder gets you most of the way there.
How does Anfim compare to Mahlkönig?
Anfim undercuts Mahlkönig on price while sharing some DNA (both sit under the Hemro group umbrella). The Luna competes with the X54 at a lower price point; the Alba targets the E65S/E80S tier for less money. Mahlkönig generally wins on refinement and grind-by-weight features; Anfim wins on value.
Do Anfim grinders work for filter coffee?
They’ll grind for drip and pour-over, but they’re espresso-first machines. If filter is your main brew method, a dedicated brew grinder or a hand grinder makes more sense.
Should I buy used?
Commercial Anfims show up used cheaply and are usually fine mechanically — ask about burr condition and hour counts if the seller has them. A worn burr set is a cheap fix on a $2,000 grinder.
